- LICENSED · BONDED · INSURED — PPO #17821
Fire Watch Security Guards in Los Angeles, CA
Instaguard Security provides licensed fire watch guards across Los Angeles County when a fire alarm or sprinkler system is down, when construction or hot work calls for a watch, or when a fire inspector orders one. Our BSIS-registered guards work under PPO #17821, patrol continuously, and log every round. Same-day coverage may be available.
- guard work
What Is Fire Watch Security?
A fire watch is a temporary safety measure in which trained personnel continuously patrol a building or site to spot fire hazards, catch early signs of fire, alert occupants, and notify the fire department. It stands in for fire protection that is impaired, missing, or not yet installed, and it stays in place until the fire authority clears it.
What a Fire Watch Guard Does on Every Patrol
On each round, a fire watch guard:
- Walks the full assigned area, including stairwells, mechanical rooms, and storage spaces
- Checks for smoke, heat, burning odors, sparks, and smoldering materials
- Confirms exits and fire lanes are clear and fire doors close
- Flags new hazards such as stacked combustibles or blocked extinguishers
- Logs the round’s start and end time, plus anything found and corrected
- Calls 911 and alerts occupants immediately if fire is discovered
When a fire protection system is impaired, Section 901.7 of the 2025 California Fire Code requires every fire watch to carry at least one approved means of notifying the fire department and makes constant patrol their only duty.
Fire Watch vs. a Regular Security Patrol
| Fire Watch | Regular Security Patrol | |
|---|---|---|
| Purpose | Detect fire, alert occupants, notify the fire department | Deter crime, control access, observe and report |
| What triggers it | A fire authority order, permit condition, or system impairment | The property owner's security needs |
| Patrol interval | Set by the fire authority (at least every half hour under the LA Fire Code) | Set by post orders and the client |
| Other duties | None during system impairments; may be combined with site security on construction sites | Access control, visitor logs, lockups, and more |
| Documentation | Round-by-round log kept on site for inspectors | Daily activity and incident reports for the client |
| When it ends | When the fire authority clears it | When the contract or schedule ends |
That is why a guard already working your front desk usually cannot double as the fire watch while an alarm or sprinkler system is down.
- guard work
When Is Fire Watch Required in Los Angeles?
Fire watch is required when the fire authority orders it, most often because a required fire alarm or sprinkler system is out of service. Construction, demolition, hot work, crowded assembly events, and fire or emergency damage can also trigger one. In the City of Los Angeles, both LAFD and the Department of Building and Safety (LADBS) can order a fire watch.
The 2025 California Fire Code took effect statewide on January 1, 2026 and sets the baseline. Local jurisdictions add their own amendments.
| Situation | Code section | Who orders it |
|---|---|---|
| Required fire alarm or sprinkler system out of service | CFC 901.7; LAMC 57.918 (City of LA) | Fire code official (LAFD in the City of LA) |
| Building construction or demolition | CFC 3303.5 (3305.5 in the 2022 edition) | Fire code official or the project's site safety plan |
| Hot work: welding, cutting, torch-down roofing | CFC 3504.2 | Required during all hot work; the fire code official or hot work program manager can extend it |
| Assembly venues and special events | CFC 403.11.1 | Fire code official |
| Hazard after a fire or other emergency | LAMC 57.918 (City of LA) | LAFD Fire Chief |
| Fire life-safety violation in an occupied building | LAMC 91.8117 (City of LA) | Los Angeles Department of Building and Safety |
Fire Alarm or Sprinkler System Out of Service
Most fire watch orders start here. Under CFC 901.7, when a required fire protection system goes out of service, the fire department and fire code official must be notified immediately, and the official can require evacuation or an approved fire watch until the system is back in service. The same section makes the owner the impairment coordinator unless someone else is named, and its preplanned-impairment steps include notifying your insurance carrier.
On Los Angeles properties, we typically see this after a broken sprinkler main, a failed alarm panel, or a planned upgrade.
Construction and Demolition Sites
CFC 3303.5 requires a fire watch for construction and demolition where the fire code official or the project’s site safety plan calls for one. It is also required during non-working hours on new construction taller than 40 feet and on multistory projects larger than 50,000 square feet per story. Construction fire watch personnel must be trained on portable fire extinguishers, carry a way to notify the fire department, and log every patrol. Unlike impairment fire watch, the code allows them to combine fire watch with site security duties.
Timing matters because sprinklers, fire barriers, and protected stairs are not considered effective until they are complete, so a half-built project is most exposed after crews leave.
Hot Work (Welding, Cutting, Torch-Down Roofing)
Under CFC 3504.2, a fire watch must stay on station during hot work and for at least 30 minutes after it ends, and the fire code official or the responsible manager under a hot work program can extend that time. The fire watch must keep extinguishing equipment ready, be trained to use it, put out spot fires, and sound the alarm.
Torch-down roofing on occupied apartment buildings is one of the most common hot work requests we handle in Los Angeles.
Special Events and Assembly Venues
Under CFC 403.11.1, when the fire code official finds a fire watch essential for public safety because of crowd size or the nature of an event, the owner, agent, or lessee must provide approved fire watch personnel. They stay on duty while the venue is open, watch for fires and blocked exits, correct hazards, and help evacuate the public. Some permits call for fire department personnel or certified fire safety officers instead, so the permit decides who can fill the role.
After a Fire, Power Outage or Wildfire Damage
The Los Angeles Fire Code lets the Fire Chief require a fire watch when a building presents a hazard because of a fire or other emergency, or when fire protection equipment is inoperable, defective, or out of service.
Damaged alarm wiring, isolated sprinkler zones, and drained alarm panel batteries after long outages can leave a building unprotected while systems are restored.
- guard work
LAFD Fire Watch Rules Property Owners Should Know
In the City of Los Angeles, fire watch rules sit in Section 57.918 of the Los Angeles Fire Code. The Fire Chief decides when a fire watch is needed and how many personnel it takes. The owner staffs the watch, briefs the personnel, and keeps the log, and the watch continues until the Chief determines the building is safe.
Who Can Serve as a Fire Watch in the City of Los Angeles
The owner assigns as many fire watch personnel as the Chief requires and instructs them on notifying the fire department, the patrol area, alerting occupants and evacuating, and, where sprinklers are shut down, reactivating the valves in a fire.
A fire watch ordered by LADBS carries a stricter requirement. Under LAMC Section 91.8117, it must be a licensed, uniformed person chosen by the owner and approved by the department.
When a private patrol operator supplies the fire watch, each guard must hold a BSIS security guard registration, which requires a DOJ and FBI background check and Power to Arrest training, and must carry the registration card on duty. If an owner does not provide required personnel, the Fire Chief can assign uniformed LAFD members until the owner does.
Fire Watch Logs and What Inspectors Look For
The owner provides a log book that stays on the premises and is available for fire department inspection. Fire watch personnel must patrol their area at least once each half hour, record each round, pass special orders to relief personnel, and stay on duty until properly relieved. On construction sites, CFC 3303.5 also requires logging every duty period, every patrol, and every structure entered.
Our logs record the same details on every assignment:
| Log entry | Why inspectors check it |
|---|---|
| Date, address, and assigned area | Confirms the right space was covered |
| Guard name for every shift | Shows who was accountable |
| Start and stop time of each round | Proves the required interval was met |
| Hazards found and how they were corrected | Shows the watch is reducing risk |
| Fire department notifications and any fire, however small | Gives investigators and insurers a complete record |
| Shift handoffs and the inspector's clearance | Closes the record cleanly |
Gaps between rounds are among the first things inspectors question.
Who Decides When a Fire Watch Can End
The fire authority decides, not the owner or the guard. In the City of Los Angeles, a fire watch is maintained until the Chief determines the building is safe or fire protection systems are restored. An LADBS-ordered fire watch stays in effect until all fire safety work is completed and approved by that department. Record the inspector’s name and clearance time in the final log entry.
Fire Watch in Cities Outside LAFD (LA County Fire, Beverly Hills, Burbank, Glendale, Pasadena)
Not every Los Angeles address falls under LAFD. The Los Angeles County Fire Department serves all unincorporated areas and 60 incorporated cities, while Beverly Hills, Burbank, Glendale, Pasadena, Long Beach, and Santa Monica run their own fire departments with local amendments. Patrol intervals, log formats, and personnel approval can differ.
Licensed healthcare facilities also follow HCAI’s fire watch Code Application Notice, which sets hourly patrols unless otherwise specified, daily log submissions, and formal termination authorization. We confirm the governing agency and its conditions at intake.
- services
Our Fire Watch Security Services
Instaguard provides fire watch for system impairments, construction, hot work, commercial buildings, and events, on short notice or scheduled ahead. Every assignment uses BSIS-registered guards, a written scope, and round-by-round logs, from a single shift to around the clock.
Emergency and Same-Day Fire Watch
Sprinkler mains break and alarm panels fail without warning. Same-day fire watch may be available depending on your location, the time of the request, and current staffing. Notify the fire department first, then request a guard with the impairment details so we can confirm a start time.
Construction Site Fire Watch
We staff working-hours and after-hours fire watch for new construction, renovation, and demolition across Los Angeles County. Guards follow the site safety plan, and where the fire code official and plan allow, fire watch can be combined with our construction site security coverage.
Hot Work Fire Watch
Our guard is on station before the torch is lit and stays at least 30 minutes after work ends, or longer if your permit or hot work program requires. We support roofing, mechanical, and tenant improvement crews on per-job or daily schedules.
Fire Alarm and Sprinkler Impairment Fire Watch
For planned and unplanned impairments, we coordinate with your fire protection contractor, patrol at the interval the fire authority sets, and keep coverage in place until the system is cleared.
High-Rise and Commercial Building Fire Watch
Office towers and large commercial buildings often need more than one guard to cover every floor and stairwell within the required interval. LAFD may require two-way radios when two or more fire watch personnel are assigned, and our multi-guard teams carry them to coordinate patrols and evacuation.
Event and Assembly Venue Fire Watch
We provide fire watch for banquet halls, conference venues, and private events where the fire code official requires it and approves licensed security personnel for the role. Productions using flame effects fall under the LAFD Film Unit, which may assign its own uniformed fire safety officer, so we confirm permit conditions before any event.
properties
Properties We Cover
- Apartments and condominiums, including occupied buildings during sprinkler and roofing work
- Hospitals and healthcare facilities, working within HCAI and local fire procedures
- Hotels, where patrols stay discreet around guests
- Warehouses and industrial facilities
- Schools and campuses
- Retail centers
- Office buildings and high-rises
- Construction sites at every stage

- guard work
How Our Fire Watch Service Works
Getting a fire watch in place takes four steps: you send the impairment details, a licensed guard arrives with equipment and log sheets, the guard patrols and logs every round, and coverage continues until the fire department clears the system.
Step 1: Call Us With the Impairment Details
Tell us which system is down or what work is planned, the property address, the affected areas, and any instructions from the fire department or inspector. We confirm the jurisdiction, patrol interval, guard count, and start time.
Step 2: A Licensed Guard Arrives With Equipment and Log Sheets
The guard arrives with a phone or radio to reach the fire department and log sheets formatted for inspection. Your site contact briefs the guard on the patrol area, notification procedure, evacuation plan, and, for sprinkler impairments, the valve procedure.
Step 3: Continuous Patrols, Logged Round by Round
The guard patrols at the required interval, records each round, reports hazards, and briefs the relief guard at every shift change.
Step 4: Coverage Until the Fire Department Clears the System
Once the fire authority clears the system or site, we record the clearance and end coverage. If the inspector extends the watch, so do we.
Standards
How Much Does Fire Watch Security Cost in Los Angeles?
Fire watch is billed per guard, per hour. Your rate depends on how many guards it takes to meet the required patrol interval, total hours, how quickly coverage starts, and the site’s complexity. We provide a written, itemized quote, usually within an hour of intake, before any guard is dispatched.
What Affects Fire Watch Pricing
- Guard count: Large or multi-story buildings may need more than one guard to meet the patrol interval.
- Duration: A one-shift hot work watch and a three-month construction watch are priced differently.
- Timing: Overnight, weekend, holiday, and short-notice starts can affect the rate.
- Site requirements: High-rise, healthcare, and hot work assignments can carry added procedures.
Minimum Shifts and Emergency Rates
Fire watch providers commonly set a minimum billable shift, and short-notice deployments can be priced differently. Instaguard states any minimum shift and emergency pricing in your written quote.

- choose us
Why Property Managers Choose Instaguard for Fire Watch
Property managers choose Instaguard for a licensed company with BSIS-registered guards, nearly two decades of Los Angeles experience, local dispatch from Sherman Oaks, and logs built to Los Angeles Fire Code standards.
Licensed Company (PPO #17821) With BSIS-Registered Guards
Instaguard is a licensed, bonded, and insured private patrol operator, PPO #17821. Every fire watch guard we assign holds a current BSIS security guard registration, completed after a DOJ and FBI background check and required training.
Serving Los Angeles Since 2008
We have provided security guard and patrol services across Los Angeles since 2008, from construction sites to hospitals and hotels.
Dispatched From Sherman Oaks
Our Sherman Oaks office at 14429 Ventura Blvd, Suite 111, schedules and supervises fire watch assignments across the San Fernando Valley, the Westside, Downtown LA, and greater LA County.
Logs Ready for the Fire Inspector
Our logs follow what the Los Angeles Fire Code asks for, and supervisors review them during the assignment, not after it ends.
Fire Watch Service Areas Across Los Angeles County
We provide fire watch throughout Los Angeles County, including Los Angeles, Burbank, Glendale, Pasadena, Long Beach, Santa Monica, Torrance, Inglewood, Downey, Compton, El Monte, West Covina, Pomona, Northridge, and Santa Clarita. We also serve Ventura County, Orange County, and the Inland Empire. Bay Area clients are supported from our San Francisco office at 505 Montgomery St, 10th Floor. Confirm availability for your address and dates when you request service.

FAQ
Fire Watch Security FAQs
How long can a fire watch last?
A fire watch lasts until the fire authority clears it, from a single shift for a quick repair to several months on a large construction project. In the City of Los Angeles, it continues until the Fire Chief determines the building is safe or the system is restored.
Can my own employees do the fire watch?
Sometimes, if the fire authority approves them and patrol is their only duty during the watch. A fire watch ordered by the Los Angeles Department of Building and Safety must be a licensed, uniformed person approved by that department. If you hire a private patrol operator, every guard it assigns must hold a current BSIS registration.
How often does a fire watch guard patrol?
In the City of Los Angeles, fire watch personnel must patrol their designated area at least once each half hour. Other jurisdictions and permits can set different intervals.
Do fire watch guards put out fires?
Their first job is to detect fire, alert occupants, and call the fire department. The fire code also expects hot work fire watches to extinguish spot fires and assembly fire watches to put out fires that occur, so they keep extinguishers within reach and are trained to use them, but they are not firefighters.
How fast can you get a fire watch guard on site?
Arrival time depends on your location, the time of the request, and current staffing. Same-day coverage may be available, so request a guard as soon as you have notified the fire department and we will confirm a start time.
What happens if I don't provide a required fire watch?
In the City of Los Angeles, it can bring penalties and minimum fines under the Los Angeles Fire Code, and the Fire Chief can assign uniformed LAFD members until you provide personnel. Ignoring an LADBS fire watch order is a misdemeanor, and under CFC 901.7 the alternative to a fire watch can be evacuating the building.
Get in touch
Security support when and where you need it.
Near you
Request a Fire Watch Guard in Los Angeles
If a fire alarm or sprinkler system is down, or a permit calls for a fire watch, request a free consultation and written quote from Instaguard Security. Have the address, affected system or planned work, fire department instructions, and start time ready.
This content is for informational purposes only and is not legal, insurance, or compliance advice. California security licensing requirements and regulations may change. For a tailored security assessment or to confirm current service options, contact Instaguard Security at (800) 786-0698 or visit instaguardinc.com.
